Installing interior jamb cove mould – Pella 81470102 User Manual
Page 11
L. Insert backer rod and apply sealant. Install siding, and insert backer rod between the each
jamb cover and the exterior finish material as deep as it will go. Apply a bead of high quality
exterior sealant on top of the backer rod and a corner bead to the top of the head frame
expander. Shape, tool, clean excess sealant. When finished, the sealant should be the shape of
an hourglass.
Note: Backer rod adds shape and depth for the sealant line. This method creates a more
flexible sealant line capable of expanding and contracting.
7
INSTALLING INTERIOR JAMB COVE MOULD
A. Install the interior
cove mould. Remove
cove mould from
accessory package
and dry fit over the
installation screws.
Install interior cove
mould and secure
with 1" brads into the
jamb and trim.
7A
Cove Mould
NEW
CONST
NEW
CONST
ALL
ALL
ALL
ALL
ALL
ALL