Panasonic AW-PH650N - Manual (Page 18)

18
Installation
 Use the 2 screws  supplied with the camera to attach
the mounting adapter  (supplied with the camera) to
the top panel of the camera.
 Attach the positioning screw  (supplied) to the camera
mounting spacer .
 Use the 2 screws  (supplied) to attach the camera
mounting spacer  to the mounting adapter  (supplied
with camera) on the top panel of the camera.
 Attach the camera mount  to the camera mounting
spacer  using the 2 screws , flat washers  and
spring washers  (supplied).
( Make sure that the two sides of the camera mount are
higher than the central area that is attached.)
 Attach the lens to the camera.
Remove the lens hood and zoom lever.
 Attach the positioning screw  (supplied) to the camera
mounting spacer .
 Use the 2 screws  (supplied) to attach the camera
mounting spacer  to the fan mounting seat  on the
top panel of the camera.
 Attach the camera mount  to the camera mounting
spacer  using the 2 screws , flat washers  and
spring washers  (supplied).
( Make sure that the two sides of the camera mount are
higher than the central area that is attached.)
 Attach the lens to the camera.
Remove the lens hood and zoom lever.
The camera mount in the opposite direction from when the AW-E655 is used as the camera.



 






 





To ensure that none of the screws are loose, use a tool to tighten them up securely.