Parasound P 3 - Manual (Page 7)

Direct 2 Unbalanced Input Jacks
The P 3 Unbalanced Direct 2 input jacks are for your next-best-sounding source component if
the Direct 1 input jacks are already connected to another source.
What You’ll Need:
• One pair of shielded interconnect cables with RCA plugs
• A source component with RCA output jacks
Before Connecting
Leave the AC cord of the P 3 disconnected until you have made all connections to
prevent any surprise burst of sound.
Make sure that all your cables are long enough so they are not strained or stretched
once they are connected.
To Connect
Plug one end of the first cable into the right Direct 2 input jack on the P 3.
Plug the other end of this cable into the right channel output jack on the source component.
Repeat steps 1 and 2 for the left channel.
CONNECTING A SOURCE COMPONENT TO THE P 3
UNBALANCED DIRECT 2 INPUTS
4
1
2
RCA Plugs
Right
Left
3 & 4
C A U T I O N
1
3
2 4
Right Left
COMPONENTS
AM
FM 87
510
TAPE DECK
OUTPUTS
?
CD PLAYER TUNER AUX