Parasound P 3 - Manual (Page 13)

CONNECTING THE P 3 TO THE UNBALANCED INPUTS ON
YOUR POWER AMPLIFIER
Use these outputs if your power amplifier does not have balanced input connectors or if you
prefer to use unbalanced connections.
What You’ll Need:
• One pair of shielded interconnect cables with RCA jacks
• A power amplifier with unbalanced input jacks
Before Connecting
Remove power to all the components in your audio system.
To Connect
Plug one end of the first cable into the right channel Line Output 1 jack on the P 3.
Plug the other end of this cable to the right channel input jack on your power amplifier.
Repeat steps 1 and 2 for the left channel.
10
C A U T I O N
Right Left
INPUTS
3 1
2 4
POWER AMPLIFIER
1
2
3 & 4
RCA Plugs
Right
Left