Pioneer HTZ180DVD - Manual (Page 52)

Additional information 13
52
En
4 Press ENTER while CHANGE is blinking.
The system will automatically enter standby
mode, then turn on again. You’ll see the new TV
system setting in the display after seeing
POWER ON.
1
Frequency step setting
Not applicable to Saudi Arabia, Israel, South
Africa, other middle eastern contries and duty
free models
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Press SHIFT+SETUP.
2 Use / to choose AM 9K/10K then
press ENTER.
3 Use / to select AM 9K or AM 10K then
press ENTER.
Dimming the Display
You can adjust the brightness of the text in the
front panel display.
1 Press SHIFT+SETUP.
2 Use / to select SYS SET then press
ENTER.
3 Use / to select DIMMER then press
ENTER.
This is shown in the front panel display.
4 Use / to select LIGHT or DARK then
press ENTER.
Setting the Key Lock
You can disable the front panel buttons by
switching the Key Lock feature on.
1 Press SHIFT+SETUP.
2 Use / to select SYS SET then press
ENTER.
3 Use / to choose KEYLOCK then press
ENTER.
4 Use / to select LOCK ON or LOCK OFF
then press ENTER.
Player setting
Media Type Format NTSC PAL AUTO
DVD/Super VCD/
Video CD/DivX
video/WMV NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
CD/MP3/WMA/
MPEG-4 AAC/
JPEG/no disc — NTSC PAL NTSC or
PAL
Note
1 You have to switch the player into standby (press  STANDBY/ON) before each change.
HTZ180_181_280_282DVD_En.book 52 ページ ２００９年３月１３日 金曜日 午後２時５０分