Pioneer HTZ180DVD - Manual (Page 43)

Other connections 11
43
En
English
Français
Deutsch
Nederlands
Italiano
Español
Remote control operation
The remote control supplied with this system
allows you to play and stop media, and perform
other operations.
1
Connecting Optional Bluetooth
ADAPTER
1 Switch the system into standby and
connect Bluetooth ADAPTER to the ADAPTER
PORT located in the rear panel.
For the connection diagram, see 5 on page 40.
2 Press  STANDBY/ON.
3 Press ADAPTER PORT and to switch to BT
AUDIO input mode.
2
Pairing Bluetooth ADAPTER and
Bluetooth wireless technology
device
“Pairing” must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth wireless technology device to enable
Bluetooth communications. 3 For more details,
see also the operating instructions of your
Bluetooth wireless technology device.
1 Press SHIFT+SETUP to select BT SETUP,
then press ENTER.
2 Use
/ to select PAIRING, then press
ENTER.
3 Select the PIN code to be used from 0000/
1234/8888 using /, then press ENTER.
PAIRING blinks.
CAUTION
• You can use any of 0000/1234/8888 PIN
codes. Bluetooth wireless technology
device using any other PIN code cannot be
used with this system.
4 Switch on the Bluetooth wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
Note
1 • It may be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
Music data
This unit
Bluetooth ®
ADAPTER
Remote control operation
Bluetooth
wireless
technology
enabled device:
cell phone Bluetooth wireless
technology
enabled device:
Digital music
player
Device not
equipped with
Bluetooth wireless
technology:
Digital music
player
+
Bluetooth audio
transmitter
(sold commercially)
2 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, BT AUDIO input mode cannot be entered even if
ADAPTER PORT is pressed.
3 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology
device.
HTZ180_181_280_282DVD_En.book 43 ページ ２００９年３月１３日 金曜日 午後２時５０分