Pioneer KEH-P7020R - Manual (Page 30)

07
Section
Audio Adjustments
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
Setting the sound focus equal-
izer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
•
FRT1 boosts the treble on the front output and
the bass on the rear output.
FRT2 boosts the treble and the bass on the front
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both
FRT1 and FRT2 the H setting provides a
more pronounced effect than the L setting.
1 Press SFEQ to select the desired SFEQ
mode.
FRT1-H (front1-high) — FRT1-L (front1-low) —
FRT2-H (front2-high) — FRT2-L (front2-low) —
CUSTOM (custom) — SFEQ OFF (off)
2 Press
2 or 3 to select the desired posi-
tion.
Press
2 or 3 until the desired position appears
in the display.
LEFT (left) — CENTER (center) — RIGHT (right)
Notes
• If you adjust the bass or treble, CUSTOM
memorizes an SFEQ mode in which the bass
and treble are adjusted for personal prefer-
ence.
• If you switch the SFEQ mode, the H.P.F. func-
tion is automatically switched off. By switch-
ing the
H.P.F. function on after selecting the
SFEQ mode, you can combine H.P.F. function
with SFEQ function.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press AUDIO to select Fad .
Press AUDIO until Fad appears in the display.
• If the balance setting has been previously
adjusted,
Bal will be displayed.
2 Press
5 or ∞ to adjust front/rear speaker
balance.
Each press of
5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
•
Fad F15 – Fad R15 is displayed as the front/rear
speaker balance moves from front to rear.
•
Fad 0 is the proper setting when only two
speakers are used.
• When the rear output setting is
Rear SP:S.W ,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 38.
3 Press
2 or 3 to adjust left/right speaker
balance.
When you press
2 or 3,
Bal 0 is displayed. Each
press of
2 or 3 moves the left/right speaker
balance towards the left or the right.
•
Bal L9 – Bal R9 is displayed as the left/right
speaker balance moves from left to right.
En 30