Using compression and bass emphasis 29, Multi-cd player audio adjustments, Using compression and bass emphasis – Pioneer KEH-P7020R User Manual

Page 29: Introduction of audio adjustments

Section

Multi-CD Player

Audio Adjustments

English

Español

Deutsch

rançais

Italiano

Nederlands

Using compression and bass
emphasis

You can use these functions only with a multi-CD
player that supports them.
Using COMP (compression) and DBE (dynamic
bass emphasis) functions let you adjust the
sound playback quality of the multi-CD player.
Each of the functions have a two-step adjust-
ment. The COMP function balances the output
of louder and softer sounds at higher volumes.
DBE boosts bass levels to give playback a fuller
sound. Listen to each of the effects as you select
through them and use the one that best
enhances the playback of the track or CD that
you are listening to.

1 Press

FUNCTION

to select

COMP

Press

FUNCTION

until

Comp/DBE

appears in

the display.
• If the multi-CD player does not support
COMP/DBE,

No Comp

is displayed when you

attempt to select it.

2 Press

5 or ∞ to select your favorite setting.

Press

5 or ∞ repeatedly to switch between the

following settings:

Comp OFF

—

Comp 1

—

Comp 2

—

Comp OFF

—

DBE 1

—

DBE 2

Introduction of audio
adjustments

AUDIO

display

Shows the audio adjustments status.

Press

AUDIO

to display the audio function

names.
Press

AUDIO

repeatedly to switch between the

following audio functions:

Fad

(balance adjustment)—

(equalizer curve

adjustment)—

Bass

(bass)—

Treble

(treble)—

Loud

(loudness)—

Sub-W1

(subwoofer1)/

Non Fad

(non fading output on/off)—

Sub-W2

(subwoofer2)/

Non Fad

(non fading output set-

ting)—

HPF

(high pass filter)—

SLA

(source level

adjustment)—

ASL

(automatic sound levelizer)

• When the subwoofer controller setting is only

S.W Control:EXT

, you cannot switch the

Sub-W1

(Refer to page 38.)
• You can select the

Sub-W2

only when

Subwoofer output is switched on in the

Sub-W1

• When the subwoofer controller setting is only

S.W Control:EXT

, you can switch the non fading

output on/off mode. (Refer to page 38.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
• When selecting the FM tuner as the source,
you cannot switch to

SLA

• To return to the playback display, press

BAND/ESC