Pioneer KEH-P7020R - Manual (Page 12)

03
Section
En 12
Tuner
Introduction of advanced tuner
operation
1
FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch between
the following functions:
BSM (best stations memory)— REG (regional)—
LOCAL (local seek tuning)— PTY (program type
selection)— TA (traffic announcement
standby)— AF (alternative frequencies search)—
NEWS (news program interruption)
• To return to the frequency display, press
BAND/ESC.
• If MW/LW band is selected, you can only
select
BSM or LOCAL .
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
Storing and recalling broadcast
frequencies
If you press any of the PRESET TUNING buttons
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a
PRESET TUNING but-
ton and hold until the preset number stops
flashing
.
The number you have pressed will flash in the
PRESET NUMBER indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same
PRESET TUN-
ING button the radio station frequency is
recalled from memory.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
• You can also use
5 and ∞ to recall radio sta-
tion frequencies assigned to PRESET TUNING
buttons.
1