Pioneer KEH-P7020R - Manual (Page 22)

Cassette Player Multi-CD Player
Note
• The radio intercept function does not work
during a Music Search operation.
Using Dolby noise reduction
When you listen to tapes that have been
recorded with Dolby B NR, turn Dolby B NR on.
1 Press FUNCTION to select B NR .
Press FUNCTION until Dolby B NR appears in
the display.
2 Press
5 to turn Dolby B NR on.
Dolby B NR :ON appears in the display. The tape
will play with Dolby B NR on.
3 Press
∞ to turn Dolby B NR off.
Dolby B NR :OFF appears in the display. The
tape will play without Dolby B NR.
Notes
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D sym-
bol are trademarks of Dolby Laboratories.
• The DOLBY B NR indicator lights when Dolby
B NR is turned on.
Playing a CD
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 23.
1 DISC NUMBER indicator
Shows the disc currently playing.
2
TRACK NUMBER indicator
Shows the track currently playing.
3
PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE until you see Multi-CD displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
1 to 6 buttons.
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
1 for disc 7, until the disc number
appears in the display.
• You can also sequentially select a disc by
pressing
5/∞.
1
3
2
En 22
05
Section