Polaris 120 Youth - Manual (Page 76)

73
ADULT SECTION
Maintenance
Lubrication Recommendations
Inspect and lubricate all greaseable components at the intervals outlined
in the Periodic Maintenance Chart beginning on page 50.
Controls and Linkage
Lubricate all bushings and tie rod ends with a light coat of oil or grease.
Remove the spindle shafts and lubricate the bushings on the top and bot-
tom of the trailing arm.
Lubricate throttle and brake controls and cables with Polaris Premium
All Season Grease. Force a small amount of lubricant down the cable.
See page 58.
Bearings
Always grease drive shaft clutch side bearings with a high quality bear-
ing grease to prevent corrosion, which will destroy the bearings.
Electrical Connections
Separate the electrical connector blocks and clean corrosive build-up
from the connectors. Lubricate the blocks with dielectric grease and re-
connect. Replace worn or frayed electrical wire and connectors. Be sure
wiring harnesses are properly secured away from sharp edges, steering
linkage, moving parts, and hot exhaust components.