Primera Technology LX 810 User Manual

Page 18

Supplies and Driver Settings

11. Click OK on your screen to indicate the new cartridge is

now installed. Once you click OK you will be prompted to

align the cartridge. The printer will automatically align the

cartridge for you as follows:
a. For Alignment you will need to have installed label

stock that is equal to or larger than 4" x 4"

(101.6 mm x 101.6 mm). If your stock meets this

requirement, skip to step d.

b. If your installed stock is smaller than 4" x 4", unload

your current stock by pressing the Unload button. The

printer will reverse the label stock so that it can be

removed from the printer.

c. Load a sheet of paper, not to exceed 8.25 inches or 209

millimeters in width, by first pulling the Throat Guide

all the way out, then placing it In the feed area, once

the printer senses the page it will pull it into place.

d. Click OK.

510943.qxd 12/5/2005 1:03 PM Page 14

TOC

INDEX