Panasonic KX-FPG371 - Manual (Page 59)

Sending Faxes
59
Broadcast transmission
This feature is useful for sending the same document to more than one party (up to 20 entries). First
program the entries, then see page 61 for transmission.
Programming entries into the
broadcast memory
1
Press { { { { MENU} } } } repeatedly until the
following is displayed.
DIRECTORY SET
NAVI.=@ BROAD=#
2
Press { { { {# # # #} } } } .
DIR= [00]
NAVI.[+ -] & SET
L The number in brackets indicates the
number of registered entries.
3
Press { { { {+ + + +} } } } or { { { {- - - -} } } } until the desired entry is
displayed.
Example: MIKE
1-987-654-3210
4
Press { { { { SET} } } } .
Example: DIR=MIKE [01]
STORE:PRESS SET
L To program other entries, repeat steps
3 and 4 (up to 20 entries).
5
Press { { { { SET} } } } to exit the program.
REGISTERED
Note:
L If you program the wrong entry, press
{ { { { STOP} } } } after step 4 to erase the entry.
L Confirm the stored entries by printing a
broadcast programming list (page 111).
{ SET} { MENU}
{ STOP}
{+}{-}