Panasonic KX-FPG371 - Manual (Page 42)

Navigator Directory
42
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect character.
2. Press {CLEAR}.
3. Enter the correct character.
Using the base unit
1
Press {MENU} repeatedly until the
following is displayed.
DIRECTORY SET
NAVI.=@ BROAD=#
2
Press {*}.
NAME=
STORE:PRESS SET
3
Enter the name, up to 10 characters (see
page 33 for instructions).
Example: NAME=ALICE
STORE:PRESS SET
L Pressing the {#} key will change to
capital or lower-case alternatively.
4
Press {SET}.
NO.=
5
Enter the telephone number, up to 30
digits, using the dial keypad.
Example: NO.=5552233
L If you want to enter a hyphen, press
{
FLASH/CALL WAIT}.
6
Press {SET}.
REGISTERED
u
NAME=
STORE:PRESS SET
L To program other entries, repeat steps
3 to 6.
7
Press {MENU} to exit the program.
Helpful hint:
L You can confirm the stored entries in the
telephone number list (page 111).
Note:
L When the following is displayed in step 6, you
can store only 5 more entries.
REGISTERED
SPACE= 5 DIRS.
L If there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (page 45).
REGISTERED
DIRECTORY FULL
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{
STOP}.
L If {STOP} is pressed before pressing {<} or
{>}
, all characters/numbers will be deleted.
{ SET} { MENU}
{ STOP}
(Delete)
{ FLASH/CALL WAIT}
(Hyphen)
{<}{>}