Philips FW-P73 - Manual (Page 23)

3139 116 19511 ( ENG)
23
TAPE CD
PROG
CLOCK/
TIMER NEWS!
RDS
DOLBY B NR STANDBY
ON
TUNER AUX
PRESET ▲ ▲
STOP • CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3 VIDEO FM • AM TAPE 1 • 2
VOLUME
S S
L R
C
PRO LOGIC
FRONT TIMER STEREO
FM BACK HSD REPEAT LW MW AM T.A. NEWS
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
REC
UP
DOWN
PLAY STOP.OPEN PAUSE ▲ ▲ ▲ ▲ ▲ RECORD PLAY STOP.OPEN PAUSE ▲ ▲ ▲ ▲ ▲
SOUND SOUND NAVIGATION
S S
L R
C
PRO LOGIC
S S
L R
C
PRO LOGIC
DYNAMIC BASS
BOOST DIGITAL SOUND
CONTROL
SWITCH OFF DOLBY PRO
LOGIC WHEN RECORDING
Notes:
– For recording, use only tape of IEC type
I (normal tape).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
One Touch Recording
• For One Touch Recording, as soon as
you press RECORD, the current
source (CD, TUNER or AUX) will be
recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to
start recording.
™ The
REC starts flashing.
3 Press PAUSE to interrupt
recording.
4 Press STOP•OPEN on tape deck 1
to stop recording.
RECORDING
CD Synchro Start
Recording
During CD synchro start recording,
• Do not fast forward/rewind your
tape in tape deck 2.
• Do not listen to another source.
1 Load a blank tape into tape deck 1
and a disc into the disc tray.
2 Press CD.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not,
select the disc by pressing
CD
(CD 1•2•3) and the tracks are
recorded according to the order on
the selected disc.
3 Press RECORD on tape deck 1 to
start recording.
™ The
REC starts flashing.
4 Press STOP•OPEN on tape deck 1
to stop recording, then press Ç to
stop CD playback.