Philips FW-P73 - Manual (Page 14)

3139 116 19511 ( ENG)
14
≤ BALANCE L/R
–
to balance the sound level of the
Front Left and Right speakers.
∞ CENTER +/-
–
to adjust the sound level of the
center speaker.
§ REAR +/-
–
to adjust the sound level of the
surround speakers.
≥ TEST TONE
–
to check the sound level of the
Front Left, Front Right, Center and
Surround speakers.
• SHUFFLE
–
to play all the available discs and
their tracks in random order.
ª SLEEP TIMER
–
to switch the system to standby
mode at a selected time.
º B
–
to switch the system to standby
mode.
CONTROLS OPERATING THE SYSTEM
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to
standby mode, the demonstration will
resume five seconds later.
To stop the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
FRONT FM
STEREO BACK HSD REPEAT REC LW MW AM T.A. NEWS
TAPE CD
PROG
CLOCK/
TIMER NEWS!
RDS
DOLBY B NR STANDBY
ON
TUNER AUX
PRESET ▲ ▲
STOP • CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3 VIDEO FM • AM TAPE 1 • 2
TIMER
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
VOLUME
SHUFFLE PROGRAM
S S
L R
C
PRO LOGIC
UP
DOWN
SOUND SOUND NAVIGATION
S S
L R
C
PRO LOGIC
S S
L R
C
PRO LOGIC
DYNAMIC BASS
BOOST DIGITAL SOUND
CONTROL
Notes for remote control:
– First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, etc.).
– Then select the desired function
(Й, н, л, etc.).