Setting up 08, Labeling tv channels, Sorting preset tv channels – Pioneer PDP-LX508G User Manual
Page 28: Language setting
Setting up
08
28
En
Labeling TV channels
You can name TV channels that you have set up, using up to five
characters. This may help you easily identify the channels during
selections.
1
Press HOME MENU.
2
Select “Setup“ (
/ then ENTER).
3
Select “Analog TV Setup“ (
/ then ENTER).
Enter your four-digit password using buttons
0 to 9 when
prompted.
4
Select “Label“ (
/ then ENTER).
5
Select “Program Entry“ (
/).
6
Select a program number (
/).
• With “General” selected, you can select 1 through 99.
• With “Air (US Type)” selected, you can select 2 through 69.
• With “Cable (US Type)” selected, you can select 1 through 125.
7
Select “Label“ (
/ then ENTER).
The name entry screen appears.
8
Select the first character (
///, then ENTER).
• The cursor moves to the second character.
9
Repeat step 8 to enter up to five characters.
• To correct entered characters, select
[
] or [] on the
screen, and then press
ENTER. The cursor moves to the
preceding or subsequent character.
• To delete the current character, select
[Delete] on the screen,
and then press
ENTER.
• To put a space for the current character, select
[Space] on the
screen, and then press
ENTER.
10 To complete the name entry, press
/ or / to select
[OK] on the screen, and then press ENTER.
11 Press HOME MENU to exit the menu.
Sorting preset TV channels
After performing a “General” channel search, you can use the
following procedure to change the sequence of the preset TV
programs. (Sorting preset TV channels is not possible if you used
“Air (US Type)” or “Cable (US Type)“ for your channel search.)
1
Press HOME MENU.
2
Select “Setup“ (
/ then ENTER).
3
Select “Analog TV Setup“ (
/ then ENTER).
Enter your four-digit password using buttons
0 to 9 when
prompted.
4
Select “Sort“ (
/ then ENTER).
The sort screen appears.
5
Select a channel to be shifted (
/// then ENTER).
6
Select a new location (
/// then ENTER).
Sorting is executed.
7
Press HOME MENU to exit the menu.
Note
• To change a page on the Sort screen in step 6, select
/ on
the screen with
/ to select a page, and then press ENTER.
Language setting
You can select the language to be used for on-screen display such
as menus and instructions, from among five languages; English,
Spanish, Portuguese, traditional Chinese and simplified Chinese.
For the language to be used in the Teletext mode, you can select
from among West Europe, East Europe, Greece/Turkey, Russia,
and Arabia.
1
Press HOME MENU.
2
Select “Setup“ (
/ then ENTER).
3
Select “Language“ (
/ then ENTER).
4
Select “Menu“ (
/).
5
Select a language (
/).
6
Select “Teletext“ (
/).
7
Select a language (
/).
8
Press HOME MENU to exit the menu.
Label
Label
Program Entry
1
1
2
3
4
5
6
7
8
9
0
A
Delete
Space
OK
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
,
.
:
;
&
'
(
)
+
-
*
/
_
@
Sort
1/4
AAAAA
01
BBBBB
02
CCCCC
03
DDDDD
04
EEEEE
05
FFFFF
06
GGGGG
07
HHHHH
08
IIIII
09
10
11
12
13
14
15
16
17
RRRRR
18
19
20
21
22
23
24
25
JJJJJ
KKKKK
LLLLL
MMMMM
NNNNN
OOOOO
PPPPP
SSSSS
TTTTT
UUUUU
VVVVV
WWWWW
XXXXX
YYYYY
QQQQQ
Language
Teletext
Menu
West Europe
English