Planar XP37W - Manual (Page 17)

V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26
16
Controls & Adjustment
A. General Adjustment
Turning the LCD TV On and Off
Plug the power cable into the AC-in socket located on the left rear of the LCD TV. Plug the other
end into an electrical socket. Press the main
POWER button located on the back of the left speaker.
Once the main power button is engaged, press the power button on the remote control or use the
power button located within the control buttons panel on underside of the TV to turn the TV on.
The power status light found in the lower right hand corner of the TV indicates the following:
Power On (TV, Video mode) --- Green light。
Power off --- Red light。
PC mode --- Green light。
Power Saving (PC mode)
--- Amber light。
Note: If “NO SIGNAL” appears for 10 minutes under TV or Video mode, the set will
automatically power off.
Viewing the Menus and On-Screen Displays
1. With the Power on, press the Menu Button.
The main menu appears on the screen.
2. Press the ◁ or ▷ button to select one of the menu
options. Then press the △ or ▽ button to access the
sub-menu.
3. Press the ◁ or ▷ button to make adjustments.
4. Press the Exit button to exit from the menu or Press
the Menu to return to the previous screen.
MENU
POWER