Primera Technology DP-XRn - Manual (Page 42)

38 Administrator Utility and Advanced Functions
Install Cartridges
This function allows you to change the color, black or both
cartridges. See Section 2 - Step 2 for the complete cartridge
change procedure. Once the cartridges has been installed you
must tell the XRn which cartridge was installed by selecting it
using the LCD Control Panel. Choose new color, new black,
new color and black or used cartridge. Choose used cartridge
if you have installed the same cartridges. Choosing used
cartridge will retain the current ink level value. Choosing
new cartridge will reset the appropriate ink levels to 100%.
Tools
The tools menu allows access to the following administrative
function. Use the to select a function.
Printer Operations - Allows access to clean print and other
printer maintenance.
About - Displays version information.
Reset PTP Service -Starts and stops job processing service.
This will correct some problems with the unit and is faster than
restarting the XRn.
Shutdown/Re-start
Selecting his function will display a sub menu that allows you
to shutdown or restart the XRn. Shutdown will cut power to
the entire unit. This will require you power the unit back on
using the power switch in the back. Restart will shutdown
unit and immediately turn the unit back on.
> New Color / Black
New Color only
New Black only
Used cartridges
> Printer Operations
About
Reset PTP Service