Panasonic AJ-D750P - Manual (Page 64)

Audio V Fade Function
When editing tapes, the edit point splicing selection (setting menu No. 309 and 310)
information is recorded on the tape. This information is then sensed during playback, and V
fade or cut processing is automatically performed for these sections. [However, only when
the playback fade selection (No. 719) is AUTO.]
When the edit point splicing selection (setting menu No. 309 and 310) is CUT
Audio signal A Audio signal B
Noise appears at the edit splice.
When the edit point splicing selection (setting menu No. 309 and 310) is FADE
Audio signal A Audio signal B
V fade is performed instantaneously to eliminate the noise.
When the playback fade selection (No. 719) is CUT, cut processing is performed for all
splices.
When the playback fade selection (No. 719) is FADE, V fade processing is performed for
all splices.
- 64 -