Paxar 9856 - Manual (Page 46)

9-2 Troubleshooting
C o m m o n E r r o r s
This section lists the most common errors you may see. Call Technical
Support if you receive any error not listed here.
Error Description/Action
025 String length is outside the range 0 to 2710.
101 The format referenced by batch is not in memory.
409 The printer memory is full. Delete unnecessary formats or
graphics from memory.
410 Parity mismatch.
411 Framing error (baud rate mismatch).
412 Flow control mismatch.
413 Online receive queue is full. Check for a flow control problem.
611 Font, bar code, or density in the batch does not exist.
612 The data in this line of the batch is either missing or does not
match the format.
613 Reference point off supply.
614 Portion of field off supply or there may be an invalid character in
the packet.
703 The printer sensed a calibration of different-sized black marks.
Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the specified number
of inches or out of supplies. Check the supply tracking, supply
marks, black mark sensor position, and supply roll for binding.
Press CANCEL. Change supply.
750 Printhead is overheated. Turn off the printer.