Paxar 9856 - Manual (Page 37)

Setting Defaults 6-5
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press L or R until you see
2. Press E. You will see the current setting, for example:
3. Press L or R until you see the option you want. Then press E.
Press U twice to exit to the Main menu.
P o w e r - U p M o d e
Power-up mode lets you decide how your printer starts each time you turn it
on. If you want the printer to be ready to start printing when it is turned on,
use the Online power-up mode. If you want the operator to perform some
other task first, use the Offline power-up mode.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press L or R until you see
2. Press E. You will see the current setting, for example:
DEFAULTS
l Slashed Zero r
SLASHED ZERO
l Yes
DEFAULTS
l Powerup Mode r
POWER UP
l Offline