Panasonic DMC-FX1GN - Manual (Page 94)

Playback (advanced)
94
Connecting to a PC (Mass Storage)
1 Turn the camera on and then set
[USB MODE] to [Mass Storage].
(P92)
2 Connect the camera to a PC via
the USB connection cable
(supplied).
[Windows]
The drive appears on the
[My Computer] folder.
• If it is the first time for you to
connect the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
¬Suggestions/Tips ¬
• The flash/access indicator lights
during communication.
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
• If the remaining battery power
becomes low during communication,
the status indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• Use the supplied USB connection
cable only.
DIGITAL
DC IN
EXT.
AV OUT
ACCESS
FX5_FX1-GN.book 94 ページ ２００３年１２月１７日 水曜日 午前９時２０分