Panasonic DMC-FX1GN - Manual (Page 10)

Preparation
10
Charging the Battery
Charge the battery before using.
1 Connect the AC cable.
• The AC cable does not fit entirely
into the AC input terminal. A gap
will remain as shown below.
• The [POWER] Indicator A lights.
• The battery cannot be charged
when the DC cable is connected to
the AC adaptor.
2 Attach the battery to the AC
adaptor.
• When the [CHARGE] Indicator B
lights, charging starts.
• When the [CHARGE] Indicator B
turns off (in about 90 minutes),
charging is finished.
3 Detach the battery.
¬Suggestions/Tips ¬
• After use, be sure to disconnect the
AC cable.
• The battery becomes warm after use/
charge or during charge. The camera
also becomes warm during use.
However, it is not a malfunction.
• The battery and AC adaptor are
designed only for this camera. Do
not use them with any other
equipment.
• Do not disassemble or alter the AC
adaptor.
FX5_FX1-GN.book 10 ページ ２００３年１２月１７日 水曜日 午前９時２０分