Philips 60PP 9601 - Manual (Page 30)

SOUND MENU
SECOND AUDIO PROGRAM
EXIT
2 OF 3
TV SPEAKERS
MORE...
DISPLAY VOLUME
TV SPEAKERS
EXIT
NORMAL
TV SPEAKERS OFF
AUX/TV INPUT
PHONO INPUT
L R
2
STEREO
1
2 1 3
5 4 6
8 7 9
0
TV VCR ACC
GUIDE
AV
INFO
SWAP PIP CH
UP
SOURCE FREEZE
FORMAT AUTO
STATUS/
EXIT
VOL CH
MUTE
SURF 100+
POWER
MENU/
SELECT
5
3
4
3
4
POSITION
DN
PIP
VIDEO OUT
AUDIO OUT
L R
FIXED
VAR
PIP
ANT A/CABLE
75
⍀ UHF/VHF
G-LINK
S
OUND
M
ENU
C
ONTROLS
(
CONTINUED
)
TV SPEAKERS
W ould you like to hear TV
programs through your audio
hi-fi system? The TV's Variable
Audio Output jacks and TV
Speaker On/Off control work
together to offer you this TV sound
option.
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
Set the audio system's volume to
normal listening level.
Turn the TV and audio system
ON. You can now adjust the sound
level coming from the audio
system with the Volume ▲▼
buttons on the TV or remote.
To hear the TV sound from only
the audio system speakers, select
TV SPEAKERS control.
With SOUND MENU (2 of 3) on
screen, move the RED highlight
with the outer MENU ring
buttons. Then press the center
MENU button to select the feature.
Press the MENU ring and
center MENU buttons to
highlight and turn OFF (
ߜ) the TV
SPEAKERS control.
You should now only hear TV
sound coming from the audio
system speakers.
Press the STATUS button to
clear the screen.
STOP
1
2
3
4
5
BACK OF TV
AUDIO SYSTEM
AUDIO IN
(RED/WHITE)
BEGIN
VARIABLE
AUDIO
OUTPUT JACKS
S MART H ELP
Remember, the audio
system may have to be in
AUX(iliary) mode to play sound
from the TV (Outputs).
Note: When the TV SPEAKER
control is set to "NORMAL" (for
TV speaker operation) make sure
the VARIABLE AUDIO OUTPUT
control (see next page) is also set
to "STEREO" in order for the TV's
AUDIO OUTPUT jacks to work
properly.
30
NOTE: The TV’s FIXED
AUDIO OUTPUT jacks can
also be used for the playback
of TV program sound with an
external audio amplifier, or
home theater hi-fi system,
Connection of the FIXED
AUDIO OUT(puts) is similar to the Variable Audio Outputs
(as shown above). However,
specific sound level
adjustments will be made with
the controls at the external
amplifier or home sound
system (instead of through the
TV’s audio level controls.)
NOTE: The TV’s PIP
AUDIO OUTPUT jacks can
also be used for additional
stereo playback options such
as wireless transmitter
headphone hook-up, or as an
external amplifier connection
source. However, with normal
PIP feature operations (when the ANT A and ANT B Input
sources are connected for
use), the PIP AUDIO
OUTPUTs will switch from
stereo to monaural (mono)
sound. Stereo sound will only
be available with the TV’s
Main screen (or ANT A
supplied signal) at that time.
Note: Audio Menu controls can be set separately dependent upon the
current TV operating mode (NTSC/ANTENNA, AUX 4, AUX 5,
etc.). For instance, the TV Speaker On/Off control can be set to
“OFF” for normal NTSC TV viewing playback operation; while the
same TV Speaker Audio control can also be set to “ON” in a AUX 4
or AUX 5 Input Source mode.