Pentax 2.1 - Manual (Page 28)

26
*1: Processing details when using PENTAX PHOTO Laboratory 2.1 appear.
*2: Information on the camera’s firmware appears for captured images.
Status bar
The status of PENTAX PHOTO Browser 2.1 appears.
The following items appear:
• Number of objects in the selected folder, total folder size (not including
subfolders) or number of selected objects and total size
• Available disk space for selected drive
• Progress status when loading thumbnails
• Identification of local disk, removable disk and network
Capture mode Capture mode when shooting Auto Picture
(Normal)
Metering mode Metering mode when shooting Multi-segment
metering
White balance White balance mode Automatic
Color temperature Color temperature (units: Kelvin) *1 -----
Fine tune A-B Amber - Blue fine tune *1 -----
Fine tune M-G Magenta - Green fine tune *1 -----
Sensitivity ISO sensitivity when shooting 200
Recorded pixels Number of recorded pixels 3008×2000
Quality Recording quality Better
Exposure
compensation Exposure compensation 0.0
Autofocus mode Autofocus mode when shooting Single AF
Autofocus area mode Autofocus area mode when shooting Automatic
Color space
Color space mode sRGB
Photo finish Photo finish settings Bright
Saturation Saturation settings 0
Sharpness Sharpness settings 0
Contrast Contrast settings 0
Drive mode Drive mode settings when shooting Single shooting
Flash mode Flash mode settings when shooting Flash off
Bracket Bracket settings when shooting Off
Multi-exposure Multi-exposure settings when shooting Off
Firmware/Software
version Version of the software when images
were last saved
*2
*ist DL Ver. 1.00
Shooting date/time Date and time shot 2005/06/25
10:00:00
Camera model Camera model PENTAX *ist DL
Data Contents Example