Precor p80 - Manual (Page 32)

30
Operating and Maintaining the P80 Console
Display
These settings are configurable per console, but can also be
configured using Preva™ Business Suite. The equipment must
be inactive before you can change the display settings. Fitness
equipment is defined as inactive if all of the following
conditions are true:
 No registered users have logged in.
 The frame parts of the equipment are not moving.
 The touch screen has detected no input.
 No buttons have been pressed.
To view the Display settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Display.
Table 5. Display settings
Setting Setting Options Default Value
Default Language Varies depending on
software version
English
Measurement
Units
US Standard
Metric US Standard
Standby Mode
Delay
•
5 Minutes
•
15 Minutes
•
30 Minutes
•
60 Minutes
15 Minutes
Time Zone GMT —12
through
GMT + 12 GMT-06 Pacific Time
(US & Canada)
Internet Browser
Access
On/Off Off
Preva TM Net Panel On/Off Off