Precor p80 - Manual (Page 27)

Configuring the System Settings
25
About
System information settings provide basic information
including equipment models and serial numbers. Most of
these settings are for informational purposes only and cannot
be modified.
To view the System Info settings menu:
1. Use the administrator code and password to view the
equipment settings.
2. Touch About.
Table 2. About settings
Setting Access Detail
Event Log Admin/Tech:
View
Provides a list of the most recent
hardware and software events,
and equipment status. If no
events have occurred since the
last time the event log was
cleared, the event log screen will
be empty.
Event Count Admin/Tech:
View
Number of events recorded by
equipment.
Console Serial
Number
Admin/Tech:
View
Stored in the console’s memory.
Lower Serial
Number
Admin/Tech:
View
Stored in the console’s memory.
Location Admin/Tech:
View
Modify
Entered on console at time of
registration.
Release
Bundle
Version
Admin/Tech:
View
Shows current version and a list
of past software updates.
Automatically updates as part of
each software upgrade.
ETag Check
Interval
Only Precor
service
technicians can
modify this
setting.
Stored in the console’s memory.