Precor p80 User Manual

Page 15

Important Safety Instructions

Electrical Recommendations: 120 V and 240
V Treadmills

Note: This is a recommendation only. NEC (National Electric

Code) guidelines or local region electric codes must be

followed.
You should have received a power cable that meets your local

electrical code requirements along with the equipment.

Precor treadmills must be connected to a 20 amp individual

branch circuit that can be shared only with one PVS. If you

need additional help with the power connections contact your

Precor authorized dealer.
Important: An individual branch circuit provides a hot conductor

and neutral conductor to a receptacle. The conductors must not be

looped, "daisy-chained", or connected to any other conductors.

The circuit must be grounded according to NEC guidelines or local

region electric codes.

Figure 1: North American 120-volt, 20-amp power receptacle

Figure 2: North American 240-volt, 20-amp power receptacle