beautypg.com

Hazardous materials and proper disposal, Product recycling and disposal, Regulatory notices for the rfid module – Precor p80 User Manual

Page 11: Radio frequency interference (rfi)

background image

Important Safety Instructions

9

Hazardous Materials and Proper Disposal

The batteries within self-powered equipment contain

materials that are considered hazardous to the environment.

Federal law requires proper disposal of these batteries.
If you plan to dispose of your equipment, contact Precor

Commercial Products Customer Support for information

regarding battery removal. Refer to Obtaining Service.

Product Recycling and Disposal

This equipment must be recycled or discarded according to

applicable local and national regulations.
Product labels, in accordance with European Directive

2002/96/EC concerning waste electrical and electronic

equipment (WEEE), determine the framework for the return

and recycling of used equipment as applicable throughout the

European Union. The WEEE label indicates that the product is

not to be thrown away, but rather reclaimed upon end of life

per this Directive.
In accordance with the European WEEE Directive, electrical

and electronic equipment (EEE) is to be collected separately

and to be reused, recycled, or recovered at end of life. Users

of EEE with the WEEE label per Annex IV of the WEEE

Directive must not dispose of end of life EEE as unsorted

municipal waste, but use the collection framework available

to customers for the return, recycling, and recovery of WEEE.

Customer participation is important to minimize any potential

effects of EEE on the environment and human health due to

the potential presence of hazardous substances in EEE. For

proper collection and treatment, refer to Obtaining Service.

Regulatory Notices for the RFID Module

When equipped with a control console as described in this

document, this equipment may include a radio-frequency

identification (RFID) module. The RFID module has been

certified to operate at temperatures between -20°C and 85°C

(-4°F and 185°F).

Radio Frequency Interference (RFI)

The RFID module conforms to the following national

standards defining acceptable limits for radio frequency

interference (RFI).