Pioneer DVR-745H-S - Manual (Page 117)

The Initial Setup menu 14
117
En
About NTSC on PAL TV
Depending on the Input Line System setting
and the NTSC on PAL TV setting, the signal
format output when the recorder is stopped
varies as shown in the table below.
About the input color system
The available options of the Input Color
System setting depend on the Input Line
System setting. The tables below show the
different options available.
Additional information about
component video output
If you switch the Component Video Out
setting to
Progressive when using a TV that
is not compatible with progressive-scan
video, you will not be able to see anything
displayed on your TV. If this happens, press
and hold the
(STOP) button on the front
panel, then press (PLAY) . This will set the
recorder’s video output back to Interlace .
Input Line
System NTSC on PAL
TV
Output
when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Taiwan and Philippines model:
Input Line
System
Built-in tuner
External
input
625 System n/a Auto
PAL
SECAM
525 System 3.58 NTSC Auto
3.58 NTSC
PAL–60
Australia, New Zealand and other Oceania area
model:
Input Line
System
Built-in tuner
External
input
625 System Auto Auto
PAL PAL
SECAM SECAM
525 System n/a Auto
3.58 NTSC
PAL–60
Other:
Input Line
System
Built-in tuner
External
input
625 System Auto Auto
PAL PAL
SECAM SECAM
525 System 3.58 NTSC Auto
3.58 NTSC
PAL–60
DVR745H_IBD_EN.book 117 ページ ２００６年７月２７日 木曜日 午後４時１１分