beautypg.com

11 troubleshooting, About bluetooth device – Philips CID3685 User Manual

Page 33

background image

32

EN

Video DVD settings do not match with the

DVD. Adjust video DVD settings.
Video connection is improper. Check the

connections.

Noise in broadcasts.

Signals are too weak. Select other stations

with stronger signals.
Check the connection of the car antenna.

Change broadcast from stereo to mono.


Preset stations lost.

Battery cable is not correctly connected.

Connect the battery cable to the terminal
that is always live.

Fuse is broken

The Fuse type is incorrect. Replace it with

a 15A fuse.
Speaker wire or power wire is grounded.

Check the connections.

Display show ERR-12

USB/SD/MMC data error. Check the USB

device or SD/MMC card.

About Bluetooth device

Music playback is unavailable on the system
even after successful Bluetooth connection.

The device cannot be used with the

system to play music.

The audio quality is poor after connection
with a Bluetooth-enabled device.

The Bluetooth reception is poor. Move

the device closer to the system or remove
any obstacle between the device and the
system.

Cannot connect with the system.

The device does not support the profi les

required for the system.
The Bluetooth function of the device is not

enabled. Refer to the user manual of the
device for how to enable the function.
The system is not in the pairing mode.

The system is already connected with

another Bluetooth-enabled device.

11 Troubleshooting

Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power

Car engine has not been started. Start the

car engine.
Connections is incorrect.

Fuse has been damaged.

Replace fuse. (see

‘Replace fuse’ on page 31)

No sound

Volume is too low. Adjust volume.

Speaker connections is incorrect.


Disc does not play

Disc is upside down. Ensure the printed

side is upwards.
Disc is dirty. Clean the disc with a clean,

soft, lint-free cloth. Wipe the disc outwards
from the center.
Disc is defective. Try another disc.

Incompatible disc is used. Try another disc.

Disc rating exceeds the restrict setting.

Change the rating settings to lower one.
Disc region code is not compatible with

the unit. Use disc with proper region code.

No image

Parking brake wire connection is incorrect.

Check the parking wiring.

Image fl ashes or distorted