Wr1500, Static route - edit, Port wireless dsl/cable router – ParkerVision WR1500 User Manual
Page 79
WR1500
4-Port Wireless DSL/Cable Router
®
81
The following table describes the labels in this screen.
Edit IP Static Route
LABEL
DESCRIPTION
DESCRIPTION
Route Name
Enter a descriptive name for this route. This is for identifi cation purposes only.
Enter a descriptive name for this route. This is for identifi cation purposes only.
Active
Select this check box to activate this static route.
Select this check box to activate this static route.
Destination IP
Address
Type the IP network address of the fi nal destination. Routing is always based on network
Type the IP network address of the fi nal destination. Routing is always based on network
number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in
the subnet mask fi eld to force the network number to be identical to the host ID.
Apply
Cancel
STATIC ROUTE - EDIT
Route Name
Active
Destination IP Address
IP Subnet Mask
Gateway IP Address
Metric
Private
0.0.0.0
0.0.0.0
0.0.0.0
2