ParkerVision WR1500 - Manual (Page 148)

WR1500
4-Port Wireless DSL/Cable Router
®
150
When DHCP is used, the following items need to be set:
Starting Address Starting Address This fi eld specifi es the fi rst of the contiguous addresses in the IP This fi eld specifi es the fi rst of the contiguous addresses in the IP
address pool.
192.168.1.33
Size of Client IP Pool Size of Client IP Pool This fi eld specifi es the size or count of the IP address pool. This fi eld specifi es the size or count of the IP address pool. 8
First DNS Server
Second DNS Server
Third DNS Server Press [SPACE BAR] to select From ISP, User Defi ned, DNS Relay From ISP, User Defi ned, DNS Relay
or None and press [ENTER].
The DNS servers are passed to the DHCP clients along with the IP
address and the subnet mask.
From ISP From ISP
IP Address Enter the IP addresses of the DNS servers. This fi eld is available
when you select User-Defi ned in the fi eld above.
N/A
DHCP Server DHCP Server
Address
If If Relay is selected in the DHCP DHCP fi eld above then enter the IP address fi eld above then enter the IP address
of the actual remote DHCP server here.
Follow the instructions in the following table to confi gure TCP/IP parameters for the Ethernet port.
TCP/IP Ethernet Setup
Continued on the next page