Philips FW930SR - Manual (Page 28)

28
English
RECORDING
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to
avoid accidental mixing with other
recording source.
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB, Incredible Surround or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If “CHECK TAPE” is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 Press SIDE on remote control to select
the recording side.
™ The
BACK or FRONT flag will be
displayed, depending on the side
selected.
4 Press CD, TUNER or AUX.
• Start playback of the selected source.
5 Press REC to start recording.
™ The REC flag starts flashing.
6 Press Ç to stop recording.
Notes:
– Only
е е е е е or ∂ ∂ ∂ ∂ ∂ mode is available
during recording.
– During recording, it is not possible to
listen to another source.
FRONT REPEAT
SHUFFLE PROGRAM
TIMER STEREO
FM
BACK HSD LW MW AM T.A. NEWS
SOUND NAVIGATION
DOLBY B
NR
DUB
(HSD)
REC
TAPE 2 TAPE 1
OPEN OPEN
MINI HIFI SYSTEM
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
VOLUME
REC
INCREDIBLE
SURROUND DYNAMIC BASS
BOOST
TAPE CD
PROG
CLOCK/
TIMER
SIDE A•B
TUNER AUX
PRESET ▲ ▲
STOP•CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
C D 1 • 2 • 3 CDR TAPE 1 • 2
DIGITAL
SOUND CONTROL
BAND
A. REV
STANDBY
ON
NEWS!
RDS
A. REV
MIC
MIC
LEVEL
NEWS/TA
RDS