Polaroid Polaview 220 - Manual (Page 16)

Connecting Mac II, Place the projector on a tabletop or other level surface
Quadra, LC, and with the lens facing the projection screen.
Powerbook and
compatibles
1 Connect your computer to the projector with the VGA/Mac II
reversible cable (part number CA18). Plug the end labeled
“To Mac” into the computer monitor port. Plug the end
labeled “To VGA” into the projector “MAC/PC” port (see the
illustration below).
Macintosh connections
2 If you want to be able to view your computer monitor and
project images with the projector simultaneously, connect
the Mac monitor redrive adapter (part number AD06) to the
REDRIVE port on the projector connector panel and then
plug your Macintosh monitor cable into the adapter.
Note: If you are connecting a Macintosh multiscan monitor
you need to substitute the Mac multiscan redrive adapter
(part number AD08) for the Mac monitor redrive adapter
(part number AD06).
12 Detailed setup
L R
SOURCE 1
VIDEO INPUTS
L R STEREO
MAC / PC
STEREO
PC / MAC
STEREO
REDRIVE
L R
RS 232
SOURCE 2 SOURCE 3 SOURCE 4 OUTPUTS
COMPUTER INPUTS
2 Macintosh
CPUs
VGA/
MAC II ADO6
MAC II ADAPTER
Mac redrive adapter
to Macintosh
monitor cable
Mac II adapter
to VGA/MAC II
cable
TO MAC
SOURCE 3
SOURCE 4
Redrive
TO MAC
TO VGA
TO VGA