Precor 300753-201 - Manual (Page 74)

24 Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer
4. Slide the covers down into the base mount. Secure each
pair of covers using two self-tapping screws and a
Phillips-head screwdriver.
Figure 13: Attaching the pivot axle covers
5. Insert the two pivot axle covers and press firmly into
place.
Making Sure the Unit is Stable
Make sure the unit is level before allowing anyone to use it.
CAUTION: To eliminate movement, make sure the adjustable feet
are in contact with the floor.
To level the unit:
1. Gently rock the unit. If there is any movement, ask your
assistant to tip the unit to one side while you locate the
adjustable feet.
2. Correct the height of each adjustable foot as follows.
If you want to … Then turn the adjustable feet …
Raise the unit Counterclockwise
Lower the unit Clockwise
Important: Place the unit on a flat surface. Rotating the
adjustable feet cannot compensate for extremely uneven surfaces.
When you are finished adjusting the unit, place the unit on the
floor and recheck that it is level.