Planet Technology VIP-101T - Manual (Page 7)

PLANET VIP-101T CLI configuration
- 1 -
Command Line Interface Configurations
PLANET VIP-101T provides CLI (Command Line Interface) for more detail, powerful machine
configurations. In most circumstances, it is not necessary to proceed configurations via telnet
session, LCD panel menu, and web configuration in VIP-101T can cover most configurations to
meet different applications on your side. VIP-101T Telnet User Interface allows you to specify (and
change) a variety of system configuration parameters. It is strongly recommended to consult
experienced engineer or related personnel on your ITSP side before entering, modifying or
confirming any parameter in CLI mode.
After log into the VIP-101T, the terminal will prompt with “usr/config$”, this shows you are log into
the CLI of the VIP-101T successfully. Operation commands in command line interface (CLI) are
introduced in respective session, please press either “?” or “help” to display related command
messages.
1. [help]
Type help or man or ? to display all the command lists. The following figure shows the
supported commands of the VIP-101T.
Syntax Description
This command has no arguments or keywords.
Example
G
Hint
1. Default username/password for VIP-101T CLI administration: root/null
password>.)
2. Most commands should be inserted with lower case. If wrongly key in, machine will
prompt, “command not recognized” for warning purpose.
3. Content of description, such as H.323 alias or username configuration, these
parameters are allowed to be Capital format.
4. Please use ”commit” command for parameter confirmation, and all modifications should
be activated via command “reboot”