Planet Technology VIP-101T - Manual (Page 42)

PLANET VIP-101T CLI configuration
- 36 -
Syntax Description
-h245fs H.245 separate channel after H.323 faststart mode.
Default
0 H.245 separate channel mode is disabled.
18. [bureau]
This parameter is used while other call party supports H.450 Hold feature. If this feature is
enabled, other call party will hear hole tone when “HOLD” button on VIP-101T keypad is
pressed.
a) -print
Parameter –print can be used to display bureau setting information and configuration.
Syntax Description
This command has no arguments or keywords.
G
Note
When H.323 fast start mode is enabled, if you wish to send DTMF message
after connection, VIP-101T will send out Q.931 message to destination call
party. You ’ll need to specify the Keypad type as “Q.931” in System
configuration menu.
usr/config$ bureau
Bureau line setting information and configuration
Usage:
bureau [-hold used]
bureau -print
-print Display Bureau line information and configuration.
-hold Specify the hold tone generation (using PCM file). (On/Off)
Setting value (On=1, Off=0).
Example:
bureau -hold 1