Planet Technology VIP-101T - Manual (Page 31)

PLANET VIP-101T CLI configuration
- 25 -
j) –tokenpwd
To co work in a H.235 security environment, VIP-101T is implemented the capability of
sending RRQ/ARQ authentication token password to Gatekeeper for authentication
purpose.
Syntax Description
-tokenpwd RRQ/ARQ authentication token password while registering toward
Gatekeeper. Command: h323 –tokenpwd x can be used to disable this
function
(1) LCD menu password: User can enter LCD system configuration by key in this
password and default value is lowercase “x.” (press TRANSFER to switch
lowercase and uppercase).
(2) H.235 security: To set RRQ/ARQ authentication token password. If VIP-101T wants
to register to a GateKeeper, which implement H.235 security token feature, VIP-101T
has to set a RRQ/ARQ authentication token password, which is provided by
GateKeeper manager. VIP-101T can ’t work normally with this GateKeeper unless
Token Password is set.
Default
x
k) –gkdis
Parameter –gkdis can be used to enable or disable auto discovery function in VIP-101T.
If this function is enabled and IP address of Gatekeeper is set as 255.255.255.255,
VIP-101T will multicast to search a Gatekeeper on network with Gatekeeper ID/name
configured with command h323 -gkname; if IP address of Gatekeeper is set, before
VIP-101T register to the assigned Gatekeeper, it will send out GRQ (Gatekeeper
Request) message with configured Gatekeeper name to Gatekeeper first.
Syntax Description
-gkdis Gatekeeper auto discovery (On=1, Off=0).
Default
0 (Gatekeeper auto-discovery is turned off.)