Philips 21PV708-715-908-918/39 - Manual (Page 7)

Initial installation
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b Close the battery compartment.
c Select the language for the on-screen display (OSD) with
the
B or A button.
d Confirm with the OK button.
e Select the country of your residence with the B or
A button.
If this country does not show up, select ’ OTH. ’.
f Confirm with the OK button.
g If the aerial (antenna) has been connected to the
TV-VIDEO Combi, press the
OK button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
Wait until all TV channels have been found. This can take
several minutes.
E ’
Time ’, ’ Year ’, ’ Month ’, ’ Date ’ will appear on the
TV screen.
Autostore ready
CHANNELS FOUND:
08
Time 15:36
Year 2000
Month 06
Date 08
Exit:
press MENU
h Check if the time in line ’ Time ’ is correct. If required,
change the time with the number buttons 0-9 on your
remote control.
i Check ’ Year ’, ’ Month ’ and ’ Date ’ in the same way.
You can switch between entry fields with B or A
button.
j Confirm the new information with the OK button.
The initial installation is now complete.
D If you have connected a decoder, you must install it
as described in the next section.
D If you have connected a satellite receiver, please
read the section ’satellite receiver’.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a Select the TV channel for which you want to use the
decoder with the
qP r button on the TV-VIDEO Combi
or the number buttons 0-9 on the remote control.
b Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’ Installation ’ with the B or
A button and confirm with the C button.
d Select the line ’ Manual store ’ with the B or
A button and confirm with the C button.
2. INSTALLING YOUR TV-VIDEO COMBI
5