Philips 21PV708-715-908-918/39 - Manual (Page 24)

Switching the On-screen display (OSD) on
or off
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu appears.
b Select the line ’ Setup ’ with the menu buttons B or
A and confirm with the C button.
SETUP
Parental control OFF
Display MAX
Format 16:9 NORMAL
Speakers ON
Sound only ON
VCR 1/2 VCR 1
Exit:
press MENU
c Select the line ’ Display ’ with the menu buttons B
or A .
d Select one of the options indicated with the menu buttons
C or D .
’ MAX ’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’
MIN ’: The OSD is reduced to a minimum.
’ PROGR. ’: The programme number is always shown.
’ COUNTER ’: The tape position is always shown.
e Confirm with the OK button.
f To end, press the MENU button.
D With the
OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
Switching to 16:9 wide screen picture
If you are using a cassette with 16:9 wide screen recordings,
you can switch this function ’ON’. The TV-VIDEO Combi will
now automatically switch to wide screen.
a Press the MENU button. The main menu appears.
b Select the line ’ Setup ’ with the B or A button and
confirm with the C button.
SETUP
Parental control OFF
Display MAX
Format 16:9 NORMAL
Speakers ON
Sound only ON
VCR 1/2 VCR 1
Exit:
press MENU
c Select the line ’ Format 16:9 ’ with the A or B
button.
d Select one of the possibilities with the C or D button.
’ NORMAL ’ : Normal size picture.
’ EXTEND. ’ : Extended size picture.
’ COMPR. ’ : 16:9 format picture.
D When you watch TV you can select between
’ EXTEND. ’ and ’ NORMAL ’.
e Confirm with the OK button.
f To end, press the MENU button.
22