Pc network properties – Polycom ViewStation User Manual
Page 151
Chapter 4
Using the ViewStation with a PC
© Polycom, Inc.
135
ViewStation User Guide
PC Network Properties
The following steps are specific to each commonly used Microsoft
Windows
™
Operating System:
For Windows 95 and 98:
a.
Right-click the Network Neighborhood icon, and then
right-click Properties.
b.
When the Network box appears, select the Configuration
tab, then double-click TCP/IP.
c.
Select the IP Address tab. Make sure the OBTAIN AN IP
ADDRESS AUTOMATICALLY button is selected. Then click
OK.
For Windows ME:
a.
Right-click the My Network Places icon, and then
right-click Properties.
b.
When the Network box appears, select the Configuration
tab, then double-click TCP/IP.
c.
Select the IP Address tab. Make sure the OBTAIN AN IP
ADDRESS AUTOMATICALLY button is selected. Then click
OK.
For Windows NT 4.0:
a.
Right-click the Network Neighborhood icon, and then
right-click Properties.
b.
When the Network screen appears, select the Protocols
tab, then double-click TCP/IP Protocol.
c.
Select the IP Address tab. Make sure the OBTAIN AN IP
ADDRESS AUTOMATICALLY button is selected. Then click
OK.
For Windows 2000:
a.
Right-click the My Network Places icon, and then
right-click Properties.
b.
In the Network and Dial-up Connections window,
right-click Local Area Connection, and select Properties.
c.
In the Local Area Connection Properties window,
double-click Internet Protocol (TCP/IP).