Software/hardware, Software information – Polycom ViewStation User Manual
Page 111
Chapter 2
Optional Configurations
© Polycom, Inc.
95
Figure 2-61. Crypto Resync Pulse Screen
On this screen you can enable crypto resync, set the time between
pulses (in seconds), and set the pulse width (in milliseconds).
If the ViewStation is in a call, and it loses H.320 synchronization, it
continuously sends the resynchronization pulses at the specified
rate with the specified pulse width until H.320 regains
synchronization.
Software/Hardware
The Software/Hardware screen (System Info > Admin Setup >
Software/Hardware) is used to obtain basic information on the
software and hardware profiles of the ViewStation. For ViewStations
with multi-point capability, an additional System Options icon
appears on this screen.
Software Information
The Software screen (System Info > Admin Setup >
Software/Hardware > Software) provides the following information
about the ViewStation:
•
System Serial Number
•
BOOTUI Number
•
Software Version
•
Network Interface Type (ISDN configured ViewStations
only)