Polycom ViewStation User Manual
Page 75
Chapter 2
Optional Configurations
© Polycom, Inc.
59
•
Broadcast Mode
RS-366 Dialing:
•
Checked: RS-366 dialing dials from the ViewStation
through the DCE connection to the far end videoconference
system.
•
Not Checked: RS-366 dialing is disabled. This option must
be Not Checked if the DCE is used to dial the call or if a far
site is connected by a direct connection.
Note
If the RS-366 Dialing option is enabled, select Dialing
Speeds and set dialing prefixes and suffixes (see
“Advanced Dialing” on page 61).
Figure 2-28. Video Network Screen
V.35 Ports used:
•
1: If the ViewStation is used to place 1-channel video calls,
select 1.
•
1+2: If the ViewStation is used to place 2x56 Kbps or 2x64
Kbps channel video calls, select 1+2.
Dialing Protocol: RS-366 appears as the dialing protocol if the
RS-366 Dialing option is enabled. If the RS-366 Dialing option is
disabled, the dialing protocol does not appear.
Broadcast Mode: Enable or disable H.331 broadcast mode if the
ViewStation is connected to the network via satellite.