Pioneer DEH-1400RB - Manual (Page 15)

Audio Adjustments
En 14
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM .
1 Press AUDIO to select the equalizer mode.
Press AUDIO until EQ-L/EQ-M/EQ-H appears in
the display.
2 Select the band you want to adjust with
2/3.
EQ-L (low) — EQ-M (mid) — EQ-H (high)
3 Press
5 or ∞ to adjust the equalizer curve.
Each press of
5 or ∞ increases or decreases
the equalizer curve respectively.
•
+6 – –6 is displayed as the equalizer curve is
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Note
• If you make adjustments when a curve other
than CUSTOM is selected, the newly adjusted
curve will replace the previous curve. Then a
new curve with
CUSTOM appears on the dis-
play while selecting the equalizer curve.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD .
Press AUDIO until LOUD appears in the display.
2 Select LOUD on or off with
5/∞.
3 Select the desired level with
2/3.
LOW (low) — MID (mid) — HI (high)
Note
• You can also switch LOUD on or off by press-
ing the LOUDNESS .
Front image enhancer (FIE)
The F.I.E. (Front Image Enhancer) function is a
simple method of enhancing front imaging by
cutting mid- and high-range frequency output
from the rear speakers, limiting their output to
low-range frequencies. You can select the fre-
quency you want to cut.
Precaution
• When the F.I.E. function is deactivated, the
rear speakers output sound of all frequencies,
not just bass sounds. Reduce the volume
before disengaging F.I.E. to prevent a sudden
increase in volume.
1 Press AUDIO to select FIE .
Press AUDIO until FIE appears in the display.
2 Select FIE on or off with
5/∞.
3 Select the desired frequency with
2/3.
100 — 160 — 250 (Hz)
Notes
• After switching the F.I.E. function ON, select
the Fader/Balance mode in the Audio Menu,
and adjust front and rear speaker volume
levels until they are balanced.
• Switch the F.I.E. function OFF when using a 2-
speaker system.