Pioneer DEH-1400RB - Manual (Page 13)

Built-in CD player Audio Adjustments
En 12
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Repeating play
Repeat play lets you hear the same track over
again.
1 Press 5 to turn repeat play on.
RPT appears in the display. The track presently
playing will play and then repeat.
2 Press 5 to turn repeat play off.
The track presently playing will continue to play
and then play the next track.
Note
• If you perform track search or fast
forward/reverse, repeat play is automatically
cancelled.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press 6 to turn pause on.
PAUSE appears in the display. Play of the cur-
rent track pauses.
2 Press 6 to turn pause off.
Play will resume at the same point that you
turned pause on.
Introduction of audio
adjustments
1 AUDIO display
Shows the audio adjustments status.
2 LOUD indicator
Appears in the display when loudness is
turned on.
Press AUDIO to display the audio function
names.
Press
AUDIO repeatedly to switch between the
following audio functions:
FAD (balance adjustment)— EQ-L (equalizer)—
LOUD (loudness)— FIE (front image
enhancer)— SLA (source level adjustment)
• When selecting the FM tuner as the source,
you cannot switch to
SLA .
• To return to the display of each source, press
BAND .
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
1 2