Setting remote, Automatic playback of dvds, Setting remote control code type – Pioneer AVH-P6600DVD User Manual

Page 87: Setting up the dvd player

! LEVEL 1 Playback of discs for children

only is possible

Notes

! We recommend to keep a record of your code

number in case you forget it.

! The parental lock level is recorded on the disc.

You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.

! With some discs, parental lock operates to

skip certain scenes only, after which normal
playback resumes. For details, refer to the
discs instructions.

Changing the level

You can change the set parental lock level.

1 Touch SETUP and VISUAL and then

touch PARENTAL.

2 Touch 09 to input the registered code

number.

3 Touch ENTER.

This enters the code number, and you can now

change the level.

# If you input an incorrect code number, the
icon

is displayed. Touch C and input the cor-

rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.

4 Touch any of 18 to select the desired

level.

The new parental lock level is set.

If you forget your code number

Refer to Changing the level on this page, and

touch C 10 times. The registered code number

is canceled, letting you register a new one.

Automatic playback of DVDs

When a DVDs disc with DVD menu is inserted,

this unit will cancel the DVD menu automati-

cally and start playback from the first chapter

of the first title.

! Some DVDs may not operate properly. If

this function is not fully operated, turn this

function off and start playback.

1 Touch SETUP and OTHERS and then

touch DVD AUTO PLAY.

2 Touch a to turn automatic playback on.

# To turn automatic playback off, touch b.
# When the automatic playback is on, you can-
not operate repeating play of DVD disc (refer to
Repeating play on page 34).

Setting remote control

code type

When the remote control operation switch is

set to DVD, changing the remote control code

type enables you to operate the Pioneer DVD

player with the supplied remote control. There

are three remote codes, code type A, code

type B and code type AVH. When operating a

multi-DVD player (e.g. XDV-P9II), select code

A. When operating a DVD navigation unit, se-

lect code B. When operating this unit, select

code AVH.

Setting up the DVD player

Section

Setting

up
th

DVD

player