Tuner listening to the radio 29, Listening to the radio, Tuner – Pioneer AVH-P6600DVD User Manual

Page 29

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

1 Source icon

Shows which source has been selected.

2 Band indicator

Shows which band the radio is tuned to, AM

or FM.

3 Preset number indicator

Shows which preset has been selected.

4 Frequency indicator

Shows to which frequency the tuner is

tuned.

5 Preset list display

Shows the preset list.

6 STEREO indicator

Shows that the frequency selected is being

broadcast in stereo.

7 LOCAL indicator

Shows when local seek tuning is on.

1 Touch the source icon and then touch

TUNER to select the tuner.

# When the source icon is not displayed, you
can display it by touching the screen.

2 Touch the screen to display the touch

panel keys.

3 Touch BAND to select a band.

Touch BAND repeatedly until the desired band

is displayed, FM1, FM2, FM3 for FM or AM.

4 To perform manual tuning, briefly

touch c or d.

The frequencies move up or down step by

step.

# You can also perform manual tuning by mov-
ing the joystick left or right.

5 To perform seek tuning, keep touching

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by holding
the joystick left or right.

Note

If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.

Tuner

Section

Tuner