Pioneer AVH-P6600DVD - Manual (Page 62)

Introduction of advanced
TV tuner operation
1
1 Function display
Shows the function names.
% Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To return to the previous display, touch BACK.
# To return to the TV picture, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P01P12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01P12 until the pre-
set number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switch between P01P06 and P07P12,
touch
or .
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P01P06 and P07P12 are not dis-
played, you can display them by touching DISP.
Notes
! Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P01P12.
Storing the strongest
broadcast stations
sequentially
1 Touch A.MENU and FUNCTION and then
touch BSSM.
2 Touch a to turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
# To cancel the storage process, touch b.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01P12.
TV tuner
En
62
Section
12